ATEIS IDA8 - Manual (Page 329)

System Functionality 329
© 2012 ATEÏS
Signal Path Temporary
In this mode, by selecting a signal link, the signal link and the entire signal path linked will be
highlighted in red. If you click in a free zone, the signal path is cancelled.
In this example, input C1 is routed in the matrix to the output 1 and 2. If you place and select
the link of channel 1, then the signal path on outputs 1 and 2 will be displayed in red.
Signal Path Path Fixed
In this mode, by selecting a signal link, the signal link and the entire signal path linked will be
highlighted in red. The signal path is fixed, to cancel it you have to click on another link or
component (not on a free zone).
In this example, input C1 is routed in the matrix to outputs 1 and 2. If you place and select the
link of channel 1, then the signal path on outputs 1 and 2 will be displayed in red.