Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 68)

68
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Reference Line
Determine Base Points
This dialog defines the two points of
the baseline. You can either manually
enter, measure or search for the
point in the database.
Search the coordinates of
the point entered in the
active data job.
Proceed to determine the
base base point by a
measurement.
Manually enter the first base
point.
Search and display the
coordinates of the point found
in the active data job.
Exit the program.
Baseline Points
REFL\ Define Baseline
1st Point of Baseline
Data Job
: FILE01.GSI
Search for: PointId+E+N
PointId : 12
SEARC MEAS INPUT VIEW
MC
QUIT
The dialogs to enter the Arc points
are the same and will not be
described here.
The base method is selected in the
Menu dialog.
Reference Line Menu
REFL\ REF LINE MENU
1 Baseline
2 Radius Arc
3 3-Point Arc
CONT
MC
CONF QUIT
Baseline
Line defined by two points.
Radius Arc
Arc defined by two points and a
radius.
3-Point Arc
Arc defined by three points.
Line of sight to the points is
not necessary, since they
can be imported from a data
file.