Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 220)

220
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Road+
For this example, the last point
staked was the 0.600 m offset point
for the right side. When the "Cross
Sections" display appears, the "
∆
CL
Offset" changes to the next point on
the cross section. The next point to
stake is the 0.600 m offset for the
right side at the next station.
Exits from the "Cross
Sections" display and returns
to the "Station & Offset".
Stakeout and Record point, continued
STAT |<-- -->| QUIT
Road+\ Station & Offset
Station : 0.000 m
Element : POB
H Offset : 0.000 m
V Offset : 0.000 m
MC
CONT XSEC <-S S-> STA?
Moves to the next station
(chainage) (you also may
enter a new station (chainage)). The
Station & Offset display will change
to reflect the new station location.
Brings up the "Cross
Sections" display.
PLOT QUIT
Road+\ Cross Sections
1R
Station : 0.000
Cross Sect:000000000OFFICE
∆∆∆∆∆ CL Offset: -0.300 m
∆∆∆∆∆ CL HgtDif: -0.030 m
Stake Offs: 0.600 m
MC
CONT CATCH <-- CENTR --> FILLS
In our example the last point staked
was on the right side. Rather than
have the rod person cross back over
to the left side, it makes sense to
stay on the right side and stake that
position and then cross over to the
left side.
To stake the catch point on the right
side:
PLOT QUIT
Road+\ Cross Sections
1R
Station : 25.000
Cross Sect:000000000OFFICE
∆∆∆∆∆ CL Offset: -1.500 m
∆∆∆∆∆ CL HgtDif: -0.030 m
Stake Offs: 0.600 m
MC
CONT CATCH <-- CENTR --> FILLS