Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 50)

50
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Stakeout
Following Graphics settings are
possible:
• OFF:
No graphics are displayed.
• From Station
The graphics are oriented from the
instrument station to the point to be
staked. This mode is recommended
for guiding the rod person from the
station.
• To Station
The graphics are oriented from the
current reflector position to the
station. This mode is adapted if
working in the polar or orthogonal
stakeout mode and in RCS mode.
• To North
The graphics are oriented to the
North.
This mode is recommended for
stakeout in RCS mode and in the grid
coordinates mode.
• From North
The graphics are oriented to the
South.
This mode is recommended for
stakeout in RCS mode and in the grid
coordinates mode.
These graphics appear after a
distance measurement. No graphics
of this type are available in the
method “Setting out with help points”.
Select Stakeout Method, continued
Example: Polar Stakeout
STAKE\ Polar Stakout
105
∆∆∆∆∆ Hz :-0°37'25''
∆∆∆∆∆ D : 17.310 m
Cut : -11.108 m +
Elev.: 100.800 m
Scale: 20.000 m
ALL DIST REC CONT TARGT POSIT
MC
METHD PLOT QUIT