Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 105)

105
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Sets of Angles
• Telescope Positioning (non
motorized instruments only)
To help you locate the target points
easily when you are using a non-
motorized instrument, and to reduce
the possibilities for errors in target
point identification, Sets of Angles
displays the differences between the
current orientation of the telescope
and the "learned" direction to the
target point specified on the previous
dialog.
∆ ∆ ∆ ∆ ∆
Hz
Displays the difference between the
current value of the Horizontal Circle
and the first direction to the target
point. Manually turn the instrument
until the value is zero, then the
instrument will be oriented toward the
target point.
∆ ∆ ∆ ∆ ∆
V
Displays the difference between the
current value of the Vertical Circle
and the first direction to the target
point. Manually turn the instrument
until the value is zero, then the
instrument will be oriented toward the
target point.
Measure Mode, continued
Press when you are ready to
measure to the target point.
You will see the Measure Further
sets measure dialog. This is not
displayed until the telescope is within
0°27' (0.5 gon) of the target point.
Press to abort and return to
the previous dialog.
TELESCOPE POSITIONING
Hz- and V-positioning:
Set direction(s) to zero.
∆∆∆∆∆ Hz : -3°56’23’’
∆∆∆∆∆ V : 1°22’25’’
OK ABORT
MC
QUIT