INFICON STC-2000A Thin Film Deposition Controller Operating Manual User Manual
Page 15
p
STC-2000A DEPOSITION CONTROLLER
y
SECTION 1.7
PRODUCT SPECIFICATIONS
STC-2000A Thin-Film Thickness and Rate Controller Specifications
High Resolution
±0.02Hz(5-6MHz), 0.0088 Angstroms/Measurement (for Aluminum)
High Accuracy
±0.5% thickness + 1 count
High
Speed
Ten
measurements/second
Measurement Range
500KA Aluminum Equivalent
Standard Sensor Crystal
6 MHz AT cut, Plano/Convex
Sensor Capacity
2 per sensor PCB card [1 PCB card max.]
Displays
240 x 64 pixel monochrome LCD with Backlight
5 discrete indicator LEDs
Operation
Menu driven "Windowing Type"
LCD Touch Panel (12 x 4 key matrix)
with 6 fixed function membrane keys
and 4 user programmable fixed membrane keys
Film Storage (Standard)
1 Active Film Program, 49 Alternate Film Programs
Total 50 Film Programs (with 10 Sensor maps)
9 Sequence recipes, 99 steps per recipe, system total is 250 steps
External Storage (Optional)
Film Parameters for films 1-50 and System Parameters I/O programs,
and Process Accounting Can be stored in Transportable Data Module
(Optional)
Hardware I/O (Standard)
per card: 8 SPDT Relays, 1.0 Amp @ 24 VDC Maximum
per card: 8 Optocoupled Inputs (Electrically Isolated), 5-24VDC [4
slots for input and/or output cards]
Computer Interface
RS-232C (Sycon Format or ASCII)
Protocols
Analog Outputs:
12 bit resolution (2 outputs on the 1 sensor card, each for use as control
or recorder)
As Control Output
2.5, 5, 10 volt @10ma. isolated output with range
menu programmable (maximum 2 control outputs per sensor card)
As Recorder Output
0 to 10 volt @ 10ma, isolated, function programmable
(rate, thickness, power, deviation, computer remote) (maximum 1
recorder output per sensor card and per system)
Power Control:
Automatic
Three Mode Closed Loop Control (PID)
Manual
Hand
Controller
Rack Mount
half width rack mount (std.). 3
1/2
" H, 8
5/8
" D, full rack extender is
optional
Power Requirements
90-264VAC, 50-60Hz (
1.4A rms@120VAC, 0.7A rms@230VAC)
Weight
equal to or less than 4.7 lbs. depending upon installed options [standard
with: 1 Sensor card, 1 Input Card, 1 Output Card]
Sensor card=0.216 lbs.,
Input card=0.135 lbs., Output card=0.14 lbs.
Operating Range
0 to 38°C ambient (power supply/LCD display), 0 to 30°C ambient
with ventilation slots restricted
Humidity
non-condensing: 5% - 85% RH
SECTION 1.XX
page 15 of 292