Yokogawa Standalone MW100 - Manual (Page 89)

2-1 IM MW100-01E
Installation and W
iring
1
2
3
4
5
App
Index
Chapter 2 Installation and Wiring
2.1 Handling Precautions
This section describes the precautions to be taken when using the MW100. Please read
before using this product.
• If you are using this instrument for the first time, make sure to thoroughly read the
safety precautions given on pages iii and iv.
• Do not remove the case.
For internal inspection or adjustment, contact your nearest YOKOGAWA dealer.
• Do not place objects on top of the instrument.
Never place other instruments or objects containing water on top of the instrument.
Doing so can lead to malfunction.
• Take proper care when carrying the instrument.
First, turn off the DUT and the MW100 and remove all cables including measurement
wires and communication cables. Then, remove the power cord from the outlet.
• To prevent internal overheating, do not obstruct the vent holes of the modules.
• This instrument uses many plastic parts. When cleaning, wipe using a dry soft cloth.
Do not use volatile chemicals since this might cause discoloring and deformation.
Doing so can cause discoloring or deformation.
• Do not bring charged objects near the signal terminals. Doing so can lead to
malfunction.
• Do not pour volatile agents on the MW100 or leave it in contact with rubber or PVC
products for an extended time. Doing so can lead to malfunction.
• Do not apply shock to the instrument.
• When not in use, make sure to turn OFF the power.
• If there are any symptoms of trouble such as smoke, strange orders, or strange
sounds coming from the instrument, immediately turn OFF the power and shut off the
power supply. Contact your dealer immediately.
• Handle the power cord correctly.
Nothing should be placed on top of the power cord. The power cord should also be
kept away from any heat sources. When unplugging the power cord from the outlet,
never pull by the cord itself. Always hold and pull by the plug. If the cord is damaged,
contact your dealer for replacement. When ordering, see the MW100 Data Acquisition
Unit Operation Guide (IM MW100-02E) for the power cord part number.