15 saving and loading setup data, Saving and loading setup data, Setup data save conditions – Yokogawa Standalone MW100 User Manual

Page 176: 15 saving and loading setup data -54

3-54

IM MW100-01E

3.15 Saving and Loading Setup Data

You can save and load MW100 main unit settings. The setup file is stored in the CONFIG
folder of the CF card.

For the settings that are saved and loaded, see “Saving Data to the CF Card” in section 1.3.

Saving and Loading Setup Data

From the top screen, click

System Setting > Save/Load Setup Data.

Saving Settings

Select Save in the

Operation list.

Enter a file name in the

File Name box, then click the Save/Load button.The

extension cannot be input (it is fixed at PNL). If you enter an existing file name,
the existing file is overwritten.

Loading Settings

Select Load in the

Operation list.

Enter a file name in the

File box, then click the Save/Load button.

Setup Data Save Conditions

From the top screen, click

System Setting > Save Option Setting.

Select the settings you wish to save by selecting the

Channel Settings,

Recording Settings, Communication Settings, and Other Settings check
boxes.

Click the

Apply button. The setting changes take effect.