beautypg.com

Transmission output control, Transmission output control -40 – Yokogawa Standalone MW100 User Manual

Page 162

background image

3-40

IM MW100-01E

Meas. Mode

Transmission Output Control

Turning Transmission Output On and Off for Analog Output/PWM Output
This is set if Trans is selected for the output action in the output range settings.

1.

From the top screen, click

Channel Setting > Transmission Output Control.

2.

Select the channel group you wish to set from the

Channel List list.

3.

Select On or Off in the

Output list of the channel number you wish to set.

4.

Click the

Apply button. Starts transmission output on channels set to On.

3.9 Analog/PWM Output Settings

See also other documents in the category Yokogawa Sensors: