Thinning operation settings, Thinning operation settings -22 – Yokogawa Standalone MW100 User Manual

Page 144

3-22

IM MW100-01E

Thinning Operation Settings

From the top screen, click

System Setting > Thinning Recording Setting.

Thinning Settings

Select the

Enable check box. Thinning recording is enabled, and you can enter

thinning recording settings.

For a description of the recording start action, see “Saving Data to the CF Card” in section 1.3.

Setting the Thinning Interval, Recording Operation, and Recording Data
Length

Select the thinning time in the

Recording Interval list. A time shorter than the

measurement interval specified for the measurement group cannot be set.

Select a recording stop action in the

Recording Action list.

Select a recording data length from the

Data Length list.

Thinning File Message Settings

Enter the message to be saved to the thinning data file in the Thinning File

Message box.

Click the

Apply button. The setting changes take effect.

3.4 Setting Acquisition Conditions for Measured/Computed Data