Yokogawa Standalone MW100 - Manual (Page 221)

5-8 IM MW100-01E
Report Function Specifications (/M3 Option)
Report operations: Starts/stops creation of report data at the same time that
measurement starts/stops. If recording is in progress at the report
creation time, report data is saved to the CF card.
Report creation can be turned ON/OFF
Report types: Hourly, daily, weekly, or monthly
Report data channels: 60 max
Measurement and MATH channels can be selected. If a target
channel is set to SKIP or OFF, report data is not created.
Report data types: Reports can be created using all maximum, minimum, average,
integral, and instantaneous values from the specified channels.
Report data acquisition interval:
100 ms (shortest)
Report data values: Numerical range: –9999999 to 99999999 (excluding the decimal
place)
Decimal place: Same as decimal place of the reference channel
Integratable range: 0.0001 to 1.000000E+16
Processing of special data:
You can select how to handle abnormal values maximum,
minimum, integral, and average values.
You can select how to handle overflows for integral and average
values.
* For details, see “Processing Reports with Abnormal Input Values
or Overflow Values” in section 1.16.
Report file creation date/time:
You can set the date, day, or time of creation. The specified date/
time will be the date/time at which report files are divided. The
creation date/time for each report file is shown in the table.
Report
File
Creation
Date
Creation
Day
Creation
Time *3
Description
Daily file – *1 – *1 0 to 23 Saves 1 day’s worth of
hourly and daily reports.
Weekly
file
– *1 Sun to
Sat
0 to 23 Saves 1 week’s worth of
daily and weekly reports.
Monthly
file
1 to 28 *2 – *1 0 to 23 Saves 1 month’s worth of
daily and monthly reports.
*1 “–” indicates that the item is invalid.
*2 The creation date cannot be set to 29, 30, or 31.
*3 The creation time for weekly and monthly reports is the same as the
creation time for the daily reports.
E-mail transmission: When an hourly, daily, weekly, or monthly report is created,
creates a report and sends by e-mail.
You can set whether or not to send the e-mail
An e-mail can be sent when a report file is completed
FTP transfer (FTP client):
Files can be transferred using the FTP client function when report
files are completed
5.2 Main Module (MW100-E) Specifications