Global channel settings, Global channel settings -38 – Yokogawa Standalone MW100 User Manual

Page 160

3-38

IM MW100-01E

Setting the Pulse Resolution

Select the pulse resolution in the

Range box.

Span Setting

Select the actual output range from the allowed output range.

Enter the lower limit of span in the

Lower box under Span. Also, enter the upper

limit value in the

Upper box.

Pulse Interval

In the

Pulse Interval box, enter a coefficient that determines the pulse interval.

For a description of the pulse interval coefficient, see “Pulse Interval” in section 1.12.

Preset Value

In the

Preset Value box, enter a preset value for the output operation when

turning on the power or when an error occurs. When a preset value is selected in
the output operation settings, the specified value is output.

For the procedure to set the output operation, see “Output Operation Settings” in this

section.

For a description of preset values, see “Output upon Startup and Error Occurrence” in

section 1.13.

Reference Channel Settings

This is set if Trans is selected for the output method.

Enter an input channel or MATH channel for transmission output in the

Ref.

Channel box.

10.

Click the

Apply button. The setting changes take effect.

Global Channel Settings

If the setting items of channels are the same, the settings of the first channel can be
applied collectively to the specified range. The setting range of channels is 001 to 060.
The specified range of channels must be analog output modules only or PWM output
modules only.

For a description of the global setting of channels, see “Global Channel Settings” in section

3.5.

3.9 Analog/PWM Output Settings