Yokogawa Standalone MW100 - Manual (Page 243)

5-30 IM MW100-01E
User Interface
Number of keys: 4: Start key (START) and Stop key (STOP),
User function key 1 (USER1),
User function key 2 (USER2),
Key action: START: Measurement, computation, and recording start
STOP: Measurement, computation, and recording stop, and
saving of data acquisition logs and alarm summaries
USER1: Write setting values file (default)
USER2: Load setting file (default)
User function keys: Keys can be assigned arbitrarily by the user with the Event/Action
function.
Key lock function: All keys can be enabled or disabled at once.
Dip switch 1: Operation upon power ON determined by dip switch settings.
All switches ON: Normal operation
Switch 5 (only) OFF: All settings initialized
Switch 6 (only) OFF: Fixed to 10-Mbps half-duplex Ethernet
communication
Switch 8 (only) OFF: Fixed IP address (192.168.0.10)
Switch 4 (only) OFF: Load the firmware
Switch 3 (only) OFF: Load the Web software
Other Functions
Time
Time function: Time settings consist of date, time, and time zone.
Backup function included.
Year designation: Last two digits of Western calendar
80 to 99 (1980-1999), 00 to 35(2000-2035)
Internal time accuracy: ±100ppm
Daylight saving time: The time on the internal clock is updated on the specified month,
week, weekday, and time.
Summer: On the month, week, weekday, and hour set as
Summer time, the time on the internal clock is moved
one hour ahead.
Winter: On the month, week, weekday, and hour set as
Winter time, the time on the internal clock is moved
one hour behind.
Unlike the internal clock, which is changed on the main unit, the
dates of the measured and computed values are not adjusted.
Tag Strings
During recording: Tags can be stored for measured and computed values that are
recorded and saved.
During displaying: You can select whether to display tags or channel numbers on all
channels.
Tag string settings: Can be set channel by channel.
No. of characters: Up to 15
5.2 Main Module (MW100-E) Specifications