12 report settings (/m3 option), Report operation settings 1, 12 report settings (/m3 option) -44 – Yokogawa Standalone MW100 User Manual

Page 166: Report operation settings 1 -44

3-44

IM MW100-01E

3.12 Report Settings (/M3 Option)

You can enter settings for creating report files.

For details on the report function, see section 1.16, “Report Function (/M3 Option).”

Setting Mode

Report Operation Settings 1

From the top screen, click

System Setting > Report Setting 1 under the Top

item.

Enabling and Disabling the Report Function

Select the

Report Function check box. The report function is enabled, and you

can enter settings for the report function.

Resetting When Recording Starts

Select the

Record Start check box. When recording starts, the Maximum,

Minimum, Average, and Integral values are reset.

Report File Creation Time Setting

Enter the time to update the daily file in the

Daily Report box.

Time is specified in 24-hour format. The creation time for weekly and monthly report files is
the same as the creation time for the daily report files.

Select the day of the week to create the weekly report file in the

Weekly Report

list.

Enter the date on which to create the monthly report file in the

Monthly Report

box.

The date is specified in the range from 1 to 28 days.

Abnormal Input Processing Setting

Select Error or Skip in the

Abnormal Input Data list for Report Data.

Overflow Processing Setting

Select Error, Skip, or Limit in the

Overflow Data list for Report Data.

Click the

Apply button. This enables the settings changes.

For processing upon abnormal input or overflows, see “Processing Reports with Abnormal

Input Values or Overflow Values” in section 1.16.