Yokogawa Standalone MW100 - Manual (Page 123)

3-1 IM MW100-01E
Setting and Data acquisition
1
2
3
4
5
App
Index
3.1 Connection Environment
This section explains the environment in which the MW100 is connected, including
requirements for the PC system, browser and plug-in software, and setting screens.
This chapter focuses on settings entered with the browser. For information about
communication commands, see the Communication Command Manual (IM MW100-17E).
PC System Requirements
• OS (Operating System)
Run the system under any of the following operating systems.
• Windows 2000
• Windows XP (excluding the 64-bit edition)
• Windows Vista (excluding the 64-bit edition)
• PC
A PC that runs one of the OS above, and that meets the following CPU and memory
requirements.
• When Using Windows 2000 or Windows XP
CPU: Pentium II, 400 MHz or faster (Pentium III, 1 GHz or faster recommended)
Memory: 256 MB or more (512 MB or more recommended)
• When Using Windows Vista
CPU: 32-bit (x86) processor of 1 GHz or more
Memory: 1 GB or more
• Hard Disk
Free disk space: 50 MB or more (1 GB or more recommended)
RPM: 7200 rpm or more recommended
• Input Devices (Mouse, Keyboard, Etc.)
A device supported by the OS
• Monitor
• When Using Windows 2000 or Windows XP
A display supported by the OS with 1024 × 768 dot resolution or better and capable
of displaying 65535 colors or more.
• When Using Windows Vista
A video card recommended for the OS, and a display supported by the OS with
1024 × 768 dot resolution or better and capable of displaying 65535 colors or more.
• Ethernet Port
An Ethernet port compatible with the OS (requires 10BASE-T or 100BASE-TX).
Browser
One of the following browser is required for entry of settings on the MW100.
• Internet Explorer 5.0, 5.5, 6.0, 7.0
Chapter 3 Setting and Data acquisition