App index – Yokogawa Standalone MW100 User Manual

Page 173

3-51

IM MW100-01E

Setting and Data acquisition

App

Index

Mail Client Setting 2

From the top screen, click

Communication Setting > Mail Client Setting 2.

Enter the subject of the e-mail in the

Subject box under Mail Header. Up to thirty-

two alphanumeric characters can be input.

Enter the sender mail address in the

Sender box.

Enter the recipient address in the

Recipient 1 box. Enter the address for

Recipient 2 in the same manner. You can specify multiple addresses for each
recipient. Separate each address with a space. You do not have to set both
recipients. Use up to 150 alphanumeric characters.

To set up alarm notification, select an address for alarm notification in the

Alarm

Notification list. 1 and 2 sends notification to both recipient 1 and 2.

Enter an alarm notification channel in the

Alarm Channel Set box under Alarm

Notification. To add instantaneous values, select the Instantaneous Data check
box. Specify channel numbers by delimiting them with dots as in 001.003.005, or
specify a range as in 004-008.

To attach instantaneous values, select the

Instantaneous Data check box.

For notification of reports, select a destination address for notification in the

Report Notification list.

1 and 2 sends notification to both recipient 1 and 2.

Select the check boxes corresponding to the

Type of reports for which to send

notification under Report Notification.

10.

Select the

Content check box corresponding to the type of data with which to

send notification under Report Notification.

11.

To set up notification of data file creation, select a notification address in the

File

Creation Notification list.

12.

In the same manner as in step 7, set

Media Alarm Notification , Power Failure

Notification , and System Error Notification.

13.

To set up Periodic Report notification, select an address for notification in the