Mail client settings, Mail client settings -50 – Yokogawa Standalone MW100 User Manual
Page 172
3-50
IM MW100-01E
Mail Client Settings
These settings configure the e-mail function. The setting screen contains mail client
setting 1 and mail client setting 2.
Mail Client Setting 1
1.
From the top screen, click
Communication Setting > Mail Client Setting 1.
2.
Select the
SMTP Client Function check box. This enables e-mail transmission.
3.
Enter the name of the SMTP server in the
Server Name box under SMTP Server.
4.
Enter the SMTP server port number in the
Port box under SMTP Server.
5.
Enter the name of the POP3 server in the
Server box under POP3 Server.
6.
Enter the POP3 server port number in the
Port box under POP3 Server.
7.
To require authorization (POP before SMTP) when sending e-mail, select
POP3 in
the
Authorization list, or if SMTP Authentication
*
is required, select
AUTH. This
enables entry of the
Authorization items.
* Firmware version R3.02 or later
8.
Enter the name for logging into the POP3 server in the
User box under
Authorization.
9.
Select the
Password check box under Authorization, and then enter the
password for accessing the server in the
Password box.
If you do not select the check box, you cannot enter the password.
10.
Click the
Apply button. The setting changes take effect.
3.14 Network Utility Settings