Yokogawa Standalone MW100 - Manual (Page 127)

3-5 IM MW100-01E
Setting and Data acquisition
1
2
3
4
5
App
Index
Host Name Display
The host name or IP address is shown in brackets on the title bar of the window.
Host name, or IP address
The IP address is displayed if a host
name has not been specified.
Switching Modes
The MW100 has a Measurement mode and a Setting mode, and the mode must be
changed depending on the operation to be performed.
Switch between Measurement
and Setting modes.
For the operating procedure, see section 3.3, “System Settings.”
For a description of the mode transition, see section 3.13, “Starting and Stopping
Measurement, Computation, and Recording.”
Meas. Mode
To Single Screen or Dual Screens for the monitor, switch to Measurement mode. Meas.
Mode (Measurement Mode) is indicated for items that require you to switch Measurement
Mode in the procedural explanation of chapter 3.
Setting Mode
To modify channel settings, system settings, display settings, or communication settings,
switch to Setting mode. Setting Mode is indicated for items that require you to switch to
Setting Mode in the procedural explanation of chapter 3.
3.1 Connection Environment