Yokogawa Standalone MW100 User Manual

Page 2

IM MW100-01E

Thank you for purchasing the MW100 Data Acquisition Unit. This user’s manual contains
useful information about the instrument’s functions, installation and wiring procedures,
operating procedures, and handling precautions. To ensure correct use, please read
this manual thoroughly before beginning operation. The following manuals relating to
the MW100 Data Acquisition Unit are provided in addition to this one. Read them along
with this manual. The MW100 Data Acquisition Unit Operation Guide (IM MW100-
02E), MW100 Viewer Software User’s Manual (IM MW180-01E), and Communication
Command Manual (IM MW100-17E) are all available on the MW100 Manual CD-ROM.

Manual Title

Manual No.

Description

MW100 Data Acquisition Unit

Operation Guide

IM MW100-02E Describes concisely the handling of the

MW100 Data Acquisition Unit and the basic

operations of the MW100 Viewer Software.

MW100 Communication

Command Manual

IM MW100-17E Describes the communication command of

the MW100 main module.

MW100 Connecting Ethernet

and Checking the Connection

IM MW100-71E Explains the procedure to check the

Ethernet connection.

Precautions on the Use of the

MX100/MW100

IM MX100-71E

Summarizes the precautions regarding the

use of the MW100 Data Acquisition Unit.

MX100/MW100 Data Acquisition

Unit Installation and Connection

Guide

IM MX100-72E

Describes concisely the installation

procedures and wiring procedures of the

MW100 Data Acquisition Unit.

MX100/MW100 Quick Start

Package Checking the Contents

of the Package

IM MX100-79E

Explains the contents of the quick start

package (/SL1, /SL2, and /SL3 options).

Control of pollution caused by

MX100/MW100 products

IM MX100-91C

Describes control of pollution caused by the

product.

772075 AC Adapter

IM 772075-01E Describes the specifications of the AC

adapter (power supply suffix code “-2”).

MW100 Viewer Software User’s

Manual

IM MW180-01E Describes the functions and operations of

the MW100 Viewer Software that comes

standard with the MW100 main module.

Notes

• This manual describes the MW100 Data Acquisition Unit, style number “S3.” The style

number is located on the name plate of the main module (see IM MW100-02E for the
location of the name plate).

• When configuring an MW100 system, the versions of the instruments used in the

system indicated by the hardware style number and software release number must
meet the following conditions.
• The main module style number must be greater than or equal to the style numbers

of any input/output modules.

• The PC software release number must be greater than or equal to the style number

of the main module.

Certain functions may become disabled on instruments or software that do not meet
these conditions, or the system may not be able to be built.

• The contents of this manual are subject to change without prior notice as a result of

continuing improvements to the instrument’s performance and functions.

• Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents. However, should you have any questions or find any errors, please
contact your nearest YOKOGAWA representative, dealer, or sales office.

• Copying or reproducing all or any part of the contents of this manual without the

permission of Yokogawa Electric Corporation is strictly prohibited.

• The TCP/IP software of this product and the document concerning the TCP/IP software

have been developed/created by YOKOGAWA based on the BSD Networking Software,
Release 1 that has been licensed from the University of California at Berkeley.