Yokogawa Standalone MW100 - Manual (Page 179)

3-57
IM MW100-01E
Setting and Data acquisition
1
2
3
4
5
App
Index
Explanation of Display Items
This is an explanation of the icons and measured data display items used in the monitor
screen.
Switching the Operation Icons
Switch to small
operation icons
You can switch from
large to small
operation icons
Switch to large
operation icons
You can switch from
small to large
operation icons
Record Start/Stop, Computation Start/Stop
Used to start and stop data acquisition.
The icons of all functions are shown in the figure for the sake of explanation, but normally
buttons are dimmed when disabled.
• Operation Icons
Computation start/stop button
Starts and stops computation (with the /M1 option or when
the 10-CH Pulse Input Module is installed)
Computation reset/clear button
Resets/clears computation.
(with the /M1 option or when the
10-CH Pulse Input Module is installed)
Timer reset button
Resets the timer.
Recording Start/Stop button
Starts and stops data acquisition.
Pause button
Pauses monitor display updating.
Data acquisition does not stop.
Alarm ACK button
If set to hold alarms, alarms
are cleared upon alarm clear
wait. (Includes relay action)
Output channel operation icons
(When output modules installed)
Area for displaying manual DO and
operation icons for arbitrary output.
Displays one channel’s worth.
Transmission output start/stop button
(When output modules installed)
Collectively starts or stops output on output channels
set for transmission output. If both ON and OFF are
mixed in the transmission output control settings,
the transmission output stop display is invoked.
Operational status
Illuminates during alarms,
recording, and computation.
• Output Channel Operation Icons
Manual DO channel:
Arbitrary output channel:
Channel number/tag name display
Channel number/tag name display
Channel number switching
Click to switch the channel number
Output value display bar
Displays output values in a bar graph. Also, you can click to change the output values.
Relay ON/OFF button
Click to turn relays ON and OFF
Output value display
Analog output: V or mA display
PWM Output: % display
Changes output value
Click to change the output value.
Channel number switching
Click to switch the channel number
3.16 Measured Data Monitor Display/Settings