Measurement channel settings – Yokogawa Standalone MW100 User Manual

Page 146

3-24

IM MW100-01E

3.5 Setting Measurement Conditions

(Measurement Channel Settings)

Setting Mode

Measurement Channel Settings

You can set the input type, range, span, and computation (linear scaling and differential
computation between channels).
The selectable input type, range, and other settings can differ depending on the module.
For details, see the explanation of the functions of individual modules in chapter 1,
“Explanation of Functions,” or chapter 5, “Specifications.”

Setting the Input Range

From the top screen, click

Channel Setting > AI/DI Channel Setting.

Select the channel group you wish to set from the

Channel List list.

Setting the Input Mode

Select the input type from the

Mode list.

Setting the Measurement Range

Select the measurement range from the

Range list.

Setting the Measurement Span

Determines the actual measurement range from the measurable range.

Enter the lower and upper limit of Span in the

Lower or Upper boxes under Span.

Remote RJC (RRJC) Reference Channel Setting

This is required when RRJC is selected for the input type.

Enter the remote RJC reference channel number in the

Ref. Ch. box.

Click the

Apply button. The setting changes take effect.