M functions, 3 single cut cy cles – HEIDENHAIN MANUALplus 4110 User Manual

Page 97

Text mode
Original mode

HEIDENHAIN MANUALplus 4110

4.3 Single Cut Cy

cles

M functions

Machine commands (M functions) are not executed until Cycle START
has been pressed. For the meaning of the M functions, refer to your
machine manual (see “M Functions” on page 408).

Call the single-cut menu.

Select "M function."

Enter the number of the M function.

Conclude entry.

Press Cycle START.

Call the single-cut menu.

Select "M function."

Switch M19 on.

Enter the stopping angle.

Conclude entry.

Press Cycle START.

M function

Spindle stop M19 (spindle positioning)