HEIDENHAIN MANUALplus 4110 - Manual (Page 34)

34 2 Basics of Operation
2.2 Oper
ation and D
a
ta Input
Data input
Input windows comprise several input fields. You can move the
cursor to the desired input field with the vertical arrow keys. The
function of the selected field is shown in the bottom line of the
window.
Place the highlight on the desired input field and enter the data.
Existing data are overwritten. With the horizontal arrow keys, you can
move the cursor within the input field and place it on the position
where you want to delete, copy or add characters.
To confirm the data you entered in a field, press a vertical arrow key
or the ENTER key.
If there are more input fields than a window can show, a second input
window is used. You will recognize this through the symbol in the
bottom line of the input window. To switch back and forth between
the windows, press the PgUp/PgDn keys.
List operations
Cycle programs, DIN programs, tool lists, etc. are displayed as lists.
You can scroll through a list with the arrow keys to check data or to
highlight elements for operations like deleting, copying, editing, etc.
Data entry is concluded when you press Input finished or
Save.—If you press the Back soft key, entries or changes
will be lost.