HEIDENHAIN MANUALplus 4110 - Manual (Page 462)

462 9 Examples
9.1 W
o
rk
ing with MANU
ALplus
Roughing cycle 2
The "starting point X, Z" is defined such that it is
located shortly before the area to be machined. It is
approached at rapid traverse.
The cycle machines the area marked in the drawing.
The expanded mode is selected for programming the
allowances, the rounding and the chamfer.
Roughing cycle 3
The cycle machines the area marked in the drawing.
The expanded mode is selected for programming the
allowances and the oblique cut.