HEIDENHAIN MANUALplus 4110 - Manual (Page 359)

HEIDENHAIN MANUALplus 4110 359
6.1
9
C-Axis Commands
6.19 C-Axis Commands
Zero point shift, C axis G152
G152 defines an absolute zero point for the C axis (reference: machine
parameter 1005, "Reference point, C axis"). The zero point is valid until
the end of the program.
Parameters
 C angle: Spindle position of "new" C-axis zero point
Standardize C axis G153
G153 resets a traverse angle >360° or <0° to the corresponding angle
modulo 360°—without moving the C axis.
Example: G152
%152.nc
[G152]
N1 M5
N2 T71 G197 S1010 G193 F0.08 M104
N3 M14
N4 G152 C30
N5 G110 C0
N6 G0 X122 Z-50
N7 G744 X122 Z-50 ZE-50 C0 Wi90 Q4
N8 G792 K30 A0 X100 J11 P5 F0.15
N9 M15
END
G153 is only used for lateral-surface machining. An
automatic modulo 360° function is carried out on the face.