HEIDENHAIN MANUALplus 4110 - Manual (Page 473)

HEIDENHAIN MANUALplus 4110 473
9.2 ICP Example "Thr
eaded St
ud"
Contour element 2
The next connecting contour element is an undercut.
The form element "undercut" describes the preceding
cylinder, the actual undercut and the subsequent
plane surface.
The part of the contour you have entered up to now is
unambiguously defined. MANUALplus draws the
contour elements and clears the symbol for the
"unsolved chamfer element."
To define the undercut, the thread pitch is
programmed in addition to the "target point."
MANUALplus automatically determines all other
undercut parameters from the standard tables.