HEIDENHAIN MANUALplus 4110 - Manual (Page 140)

140 4 Cycle Programming
4.5 Recessing c
y
cles
Cycle run
1 Calculate the recess positions and the proportioning of cuts.
2 Approach workpiece for next recess from starting point or from
last recess on paraxial path.
3 Machine along the defined contour.
4 Return and approach for next pass.
5 Repeat 3 to 4 until the complete recess has been machined.
6 Repeat 2 to 5 until all recesses have been machined.
7 Return to starting point on paraxial path.