HEIDENHAIN MANUALplus 4110 - Manual (Page 255)

HEIDENHAIN MANUALplus 4110 255
5.4 Pr
ogr
amming Chang
e
s t
o
ICP Cont
ours
Editing an unsolved contour element
If a contour contains "unsolved" contour elements, the "solved"
elements cannot be changed. You can, however, set or delete the
"tangential transition" for the contour element located directly before
the unsolved contour area.
If the element to be edited is an unsolved element, the
associated symbol is marked "selected."
The element type and the direction of rotation of a circular
arc cannot be changed. Should it be necessary to change
the element type / direction of rotation, you must delete
the contour element and then add it again.