HEIDENHAIN MANUALplus 4110 - Manual (Page 131)

HEIDENHAIN MANUALplus 4110 131
4.5 Recessing c
y
cles
Recessing, radial/axial
Call the recessing menu.
Select the "Recessing, radial" cycle (see figures at
right).
Select "Recessing axial" (see figures on the following
page).
The cycle machines the number of recesses defined in Q. The
parameters X/Z to X2/Z2 define the first recess (position, recess depth
and recess width).
Cycle parameters
 X, Z starting point
 X2, Z2 contour end point
 P recessing width: Infeeds <= P
„ No input: P = 0.8 * cutting width of the tool
 E dwell time (for chip breaking)—default: length of time for two
revolutions
 DX, DZ distance to subsequent recess with respect to the
preceding recess
 Q number of recess cycles —default: 1
 T tool number
 S spindle speed / cutting speed
 F feed per revolution