HEIDENHAIN MANUALplus 4110 - Manual (Page 444)

444 8 Organization Mode of Operation
8.3 T
ransf
er
Configuring for data transfer
Press Settings.
Press Network and define the
directory of the remote station
("Device name" input field)—see
figure to the upper right.
Press Serial and define the interface
parameters—see figure to the lower
right.
Press Printer and define the
interface parameters.
Transfer the settings.
Press Back.
Access authorization as “system manager” is
necessary to access the settings (see “Access
authorization” on page 453). The active mode is
displayed to the right above the soft-key row.
Settings in "Network" mode
„ Device name: Enter the name and directory of the
server as follows:
//Computer name/path
(The "/" character corresponds to the "\" character on
the PC; The "computer name" and the "share name"
are set on the PC of the remote station.)
„ Auto-logon
„ Yes: Automatic logon is active.
„ No: Automatic logon is not active.
„ User name: For automatic logon
„ Password: For automatic logon