HEIDENHAIN MANUALplus 4110 - Manual (Page 76)

76 3 Machine Mode of Operation
3.1
1
Pr
ogr
am Manag
e
ment
Functions for program management
First select the desired program and then press the corresponding
function key. The selected program is displayed in the "Program
number" field.
„ Sort program list
The programs of a program group can be listed in alphabetical order
or by date.
„ Select program
You can select the desired program from the list or enter the
program number.
„ Activate program
When you press Select program, the control returns to the
previous operating environment. The program that is displayed in
the "Program number" field is activated.
„ Create new program
Enter the "new program number" and press Select program.
„ Copy program
The selected program is copied. The copied program then needs to
be assigned a new program number. The other program data is not
changed. Neither are the contents.
„ Delete program
The selected program is deleted from the system.
„ Change the program description
With Change text you can call the alphanumeric keyboard to
change a program description or to enter a new one.
If the cursor is located in the "program number" field, you can enter the
number of the desired program. If you do not know the exact program
number, simply enter the "incomplete" number and switch into the
program list with ENTER. The cursor is then located on the first
program number that matches your entry.
When the cursor is in the program list window, you can scroll through
the list to find the desired program. Enter the first character of the
program number for the highlight to jump to the next program that
starts with this number.
You can switch from "Program number" to "Program list" with ENTER
(or the vertical arrow keys). And ENTER (or the horizontal arrow keys)
will take you back to "Program number" again.
If you wish to change a program number, you must copy
the program, assign it a new program number, and then
erase the original program.