HEIDENHAIN MANUALplus 4110 - Manual (Page 53)

HEIDENHAIN MANUALplus 4110 53
3.4 Mac
h
ine Set
u
p Setting C-axis values
The zero point for the C axis can be defined as follows:
Select "Setup."
Press "Set C-axis values."
Position the C axis.
Define the position as the zero point of the C axis.
Enter the zero point shift of the C axis.
Confirm entry for MANUALplus to calculate the zero
point of the C axis.
Delete zero point shift of the C axis.
Defining the zero point of the C axis