HEIDENHAIN MANUALplus 4110 - Manual (Page 72)

72 3 Machine Mode of Operation
3.9 Gr
ap
hic Simulation
Displays beneath the graphics window:
„ Field "N"
Block number of the simulated block.
„ Fields "X" and "Z"
Target coordinates of the simulated rapid traverse
or feed path.
„ Field "C"
Spindle angle for positioned spindle (M19) or C axis.
„ Field "T"
Simulated tool (programmed T number).
„ Input box
For cycle programs, the cycle designation and the
parameters are displayed.
Warnings
The simulation feature checks cycle and DIN
programs. Warnings that have occurred are displayed
with the soft key to the extreme left (see “Error
Messages” on page 36). To read the warnings, press
the soft key.
Soft keys
Call the "Time calculation" (see “Time Calculation” on
page 74).
Switch to Face view if you have programmed drilling/
milling cycles for the face.
Switch to Surface view if you have programmed
drilling/milling cycles for the cylindrical surface.