HEIDENHAIN MANUALplus 4110 - Manual (Page 185)

HEIDENHAIN MANUALplus 4110 185
4.6 Thr
ead and Under
c
ut Cy
cles
Cycle run
1 Approach workpiece from X, Z
„ to cylinder starting point X1, or
„ for the thread chamfer.
2 Machine thread chamfer, if defined.
3 Finish cylinder up to beginning of undercut.
4 Machine undercut.
5 Finish to end point X2 on plane surface.
6
„ Without return: Tool remains at the end point X2.
„ With return: Return to starting point on diagonal path.