HEIDENHAIN MANUALplus 4110 - Manual (Page 57)

HEIDENHAIN MANUALplus 4110 57
3.5 Set
ting up T
o
ols
In the tool table, enter the tool you want to measure (see “Tool Data”
on page 418).
Insert the tool and enter the T number in "Set T, S, F."
Activate Measure tool.
Position the tool at the cross hairs of the optical gauge by using the jog
keys or the handwheel.
Save the tool dimension in Z (the compensation value
is deleted).
Save the tool dimension in X (the compensation value
is deleted).
Enter the cutting radius.
Transfer the cutting radius to the tool table.
Finding the tool dimensions by using an optical gauge