HEIDENHAIN MANUALplus 4110 - Manual (Page 303)

HEIDENHAIN MANUALplus 4110 303
6.8 Compensation V
a
lues
Additive compensation G149
MANUALplus manages 16 tool-independent compensation values,
which are assigned the designations D901 to D916. These
compensation values are added to the active wear compensation
values of the tools.
Additive compensations are effective from the block in which they are
programmed with G149 and remain in effect up to the
„ Next "G149 D900"
„ Next tool change
„ Program end
Parameters
 D additive compensation (default: D900):
„ D900: deactivates the additive compensation
„ D901 to D916: activates the additive compensation
Example: G149
%149.nc
[G149]
N1 T3 G96 S200 G95 F0.4 M4
N2 G0 X62 Z2
N3 G89
N4 G42
N5 G0 X27 Z0
N6 G1 X30 Z-1.5
N7 G1 Z-25
N8 G149 D901
N9 G1 X40 B-1
N10 G1 Z-50
N11 G149 D902
N12 G1 X50 B-1
N13 G1 Z-75
N14 G149 D900
N15 G1 X60 B-1
N16 G1 Z-80
N17 G1 X62
N18 G80
END