HEIDENHAIN MANUALplus 4110 - Manual (Page 234)

234 4 Cycle Programming
4.9 Dr
illing/Milling P
a
tt
er
ns
Drilling/milling pattern circular, radial
Call the drilling menu.
Select "Drilling, radial " (see figure at upper right).
Select "Deep-hole drilling, radial " (see figure at center
right).
Select "Tapping, radial " (see figure at lower right).
Press the Pattern circular soft key.
Call the milling menu.
Select "Slot radial" (see figure at top of next page).
Select "ICP contour, radial" (see middle figure on next
page).
Press the Pattern circular soft key.
Press "Pattern circular" to machine hole patterns or figure patterns in
which the individual features are arranged at a regular spacing in a
circle or circular arc on the lateral surface.
Drilling pattern circular, radial
Milling pattern circular, radial