HEIDENHAIN MANUALplus 4110 - Manual (Page 197)

HEIDENHAIN MANUALplus 4110 197
4.7 Dr
illing Cy
cles
Thread milling, axial
Call the drilling menu.
Select the "Thread milling, axial" cycle.
The cycle mills a thread in existing holes.
Cycle parameters
 X, Z starting point
 C spindle angle (C-axis position)—default: Current spindle angle
 Z1 starting point of thread —default: Starting point Z
 Z2 end point of thread
 I diameter of thread
 R approaching radius —default: (I—milling diameter)/2
 F1 thread pitch
 J direction of thread —default: 0
„ J=0: Right-hand
„ J=1: Left-hand
 H cutting direction —default: 0
„ H=0: Up-cut milling
„ H=1: Climb milling
 SR return speed for enabling the tap to retract rapidly—default:
Same spindle speed as for tapping
 T tool number
 S spindle/cutting speed for the driven tool
Use threading tools for this cycle.
Danger of collision!
Be sure to consider the hole diameter and the diameter of
the milling cutter when programming "approaching
radius R."