HEIDENHAIN MANUALplus 4110 - Manual (Page 430)

430 8 Organization Mode of Operation
8.1 Or
g
a
nization Mode of Oper
ation
8.1 Organization Mode of
Operation
This mode of operation offers various functions for communication
with other systems, data security, setting of parameters, and
diagnosis.
The following functions are available:
„ Parameter settings
Parameters enable you to adapt MANUALplus to your specific
requirements. The "Parameter" menu provides functions to display
and edit parameters.
„ Transfer
Input and output of programs, parameters, and tool data. The
transfer functions are used either for exchange of data with other
systems or for data security.
„ System Service
Some parameter settings and functions may only be accessed by
qualified personnel. User registration and administration is done in
the System service mode.
You can also set the date and time and select the screen language
in this mode.
„ Diagnosis
The Diagnosis menu provides functions for checking the system
and for locating errors.
Menu logic
Each menu item in the Organization mode is preceded by a number.
By pressing the corresponding key on the numerical keypad, you can
activate the function, open a display or input window, or call the next
menu level.
Basics of operation
Data is input in the usual way on the MANUALplus (see “Data input”
on page 34). The data is transferred to the control when you press OK
or place the cursor on the OK field and press "Enter." If you leave the
input window with Cancel, then entries or changes you made will be
lost.
Switching to another function
The "Menu" key takes you back to the main level where you can then
select another function of the Organization mode of operation.
Some functions in the service and diagnosis menu can
only be accessed by authorized commissioning and
service personnel.