HEIDENHAIN MANUALplus 4110 - Manual (Page 202)

202 4 Cycle Programming
4.8 Milling Cy
cles
Rapid traverse positioning
Call the milling menu.
Select the "Rapid traverse positioning" cycle.
The cycle activates the C axis and positions the spindle (C axis) and the
tool.
Cycle parameters
 X2, Z2 target point
 C2 end angle (C-axis position)—default: Current spindle angle
Cycle run
1 Activate C axis.
2 Position to end angle C2 at rapid traverse.
3 Position the tool to target point X2, Z2 at rapid traverse.
„ "Rapid traverse positioning" is only required in Manual
mode.
„ The C axis is deactivated by a subsequent manual
milling cycle.