HEIDENHAIN MANUALplus 4110 - Manual (Page 409)

HEIDENHAIN MANUALplus 4110 409
6.30 M F
unctions
Machine commands
The effect of machine commands depends on the configuration of
your machine. The table lists the M commands used on most
machines.
Please refer to your machine manual for detailed information on which
of the M commands listed are supported by your machine and which
additional M commands are available.
M commands as machine commands
M03 Spindle ON (CW)
M04 Spindle ON (CCW)
M05 Spindle STOP
M12 Lock spindle brake
M13 Release spindle brake
M14 C axis ON
M15 C axis OFF
M19 C.. STOP spindle at position "C"
M40 Shift gear to range 0 (neutral)
M41 Shift gear to range 1
M42 Shift gear to range 2
M43 Shift gear to range 3
M44 Shift gear to range 4
M103 Spindle 1 (auxiliary spindle for driven tool)
ON (CW)
M104 Spindle 1 (auxiliary spindle for driven tool)
ON (CCW)
M105 Spindle 1 (driven tool) STOP