HEIDENHAIN MANUALplus 4110 - Manual (Page 239)

HEIDENHAIN MANUALplus 4110 239
4.1
0
DIN Cy
cles
4.10 DIN Cycles
„Select "DIN cycle."
This function allows you to select a DIN cycle (DIN macro) and
integrate it in a MANUALplus cycle program.
The machine data that are programmed in the DIN cycle (in Manual
mode, the currently active machine data) become effective as soon as
you start the DIN macro. You can change the machine data (T, S, F) at
any time by editing the DIN macro.
Cycle parameters
 N DIN macro number
 T tool number
 S spindle speed / cutting speed
 F feed per revolution
Danger of collision!
„ Cycle programming: With DIN macros, the zero point
shift is reset at the end of the cycle. Therefore, do not
use any DIN macros with zero point shifts in cycle
programming.
„ In this cycle, no starting point is defined. Please keep in
mind that the tool moves on a diagonal path from the
current position to the first position that is programmed
in the DIN macro.