HEIDENHAIN MANUALplus 4110 - Manual (Page 468)

468 9 Examples
9.1 W
o
rk
ing with MANU
ALplus
Program list
The figure to the right shows the resulting cycle
program.
Simulation in program run
The program is simulated in the "Program run" mode.
Press the "Menu" key to return to the main menu and
select Program run. MANUALplus loads the program
that was last machined. In this case, the cycle
program "999" is loaded.
In the figure to the right, the complete machining
operation for producing the workpiece was simulated
in the Program run mode. In this example, the
Continuous run function is active. MANUALplus
therefore runs the simulation without interruption.