HEIDENHAIN MANUALplus 4110 - Manual (Page 375)

HEIDENHAIN MANUALplus 4110 375
6.21 Lat
er
al Surf
ace Mac
h
ining
Example: G112, G113
%110.nc
[G110, G111, G113, G794]
N1 T71 G197 S1200 G195 F0.2 M104
N2 M14
N3 G120 X100
N4 G110 C0
N5 G0 X110 Z5
N6 G794 X100 XE97 P2 U0.5 R0 K0.5 F0.15 H0
Q0
N7 G110 Z-20 CY0
N8 G111 Z-40
N9 G113 CY39.2699 K-40 J19.635
N10 G111 Z-20
N11 G113 CY0 K-20 J19.635 B0
N12 G80
N13 M15
END
„ Define the center or end point either with "C/W" or
"CY/J."
„ Program either center or radius.
„ If you do not program the center, MANUALplus
automatically calculates the possible solutions for the
center and chooses that point as the center which
results in the shortest arc.
„ Permitted as geometry command only for G112/G113:
Parameters Q, B
„ Permitted as machining command only for G112/G113:
Parameter X