HEIDENHAIN MANUALplus 4110 - Manual (Page 392)

392 6 DIN Programming
6.24 Set T
, S
, F
6.24 Set T, S, F
Tool number, spindle speed /cutting speed and
feed rate
The values for feed rate and spindle speed that are
programmed with "Set T, S, F" always refer to the
spindle.
MANUALplus then transfers the parameters to the
DIN program together with the identification letters or
G functions.
„ T: "T.."
„ S: G96/G97 S..
„ F: G94/G95 F..
Select "Set T, S, F."
Select the soft keys, enter the parameters.
„ T tool number
„ S cutting speed or spindle speed (selected by
soft key)
„ F feed per revolution or feed rate (selected
by soft key)
Conclude data input with Save.
Example: T, S, F
%819.nc
[G819]
N1 T3 G95 F0.25 G96 S200 M3
N2 G0 X120 Z2
N3 G819 P5 I1 K0.3
N4 G0 X80 Z2
N5 . . .
END
Entering T, S, F