HEIDENHAIN MANUALplus 4110 - Manual (Page 414)

414 7 Tool Management Mode
7.
2 T
ool Or
g
a
nization
7.2 Tool Organization
The entries in the tool list are designated T1...T99.
The tool tip in the graphic display shows the tool type
and the tool orientation. In the tool list, the
MANUALplus displays important parameters and the
tool description. The input window shows additional
data on the tool that is highlighted in the tool list.
You can navigate within the tool list with the arrow
keys and "PgUp/PgDn" to check the entries. You can
also "search" entries of a particular tool type.
Enter data for new tool
 Position the cursor on a free space.
 Press Add.
 Select tool type—MANUALplus opens the input
window and illustrates the individual parameters in
the graphic support window.
Edit entry
 Place the cursor on the desired entry.
 Press Change.
 The tool parameters are displayed in a dialog box
and can be edited (the tool type cannot be edited).
Copy entry
 Place the cursor on the desired entry.
 Press Copy.
 Position the cursor on a free space.
 Retrieve the copied tool data by pressing Insert.
Relocate entry
 Place the cursor on the desired entry.
 Press Cut out (the tool data are deleted).
 Position the cursor on a free space.
 Retrieve the tool data by pressing Insert.
Delete entry
 Place the cursor on the entry to be deleted.
 Press Delete.