HEIDENHAIN MANUALplus 4110 - Manual (Page 149)

HEIDENHAIN MANUALplus 4110 149
4.5 Recessing c
y
cles
Cycle run
1 Approach contour area from X, Z.
2 Finish first side, then finish contour valley up to position just before
contour end point Z2/X2.
3 Move on paraxial path:
„ radially to X/Z2.
„ axially to Z/X2.
4 Finish second side, then finish remainder of contour valley.
5 Return to starting point on paraxial path.