HEIDENHAIN MANUALplus 4110 - Manual (Page 32)

32 2 Basics of Operation
2.1 The MANU
ALplus Scr
een
2.1 The MANUALplus
Screen
MANUALplus shows the data to be displayed in
windows. Some windows only appear when they are
needed, for example, for typing in entries.
In addition, MANUALplus shows the type of
operation and the soft-key display on the screen.
Each function that appears in a field of the soft-key
row is activated by pressing the soft key directly
below it.
Screen windows displayed
„ Machine window
Position display, display of machine data, machine
status, etc.
„ List and program window
Display of program lists, tool lists, parameter lists,
etc. To select specific elements from the list, simply
move the highlight to the desired element with the
arrow keys.
„ Menu window
Display of menu symbols. This window only
appears on the screen when menu selection is
active.
„ Input box
For entering the parameters of a cycle, ICP
element, DIN command, etc. You can enter data,
check already programmed data, and edit and
delete data as required. This window is also used to
display data.
„ Graphic support window
Input data (such as cycle parameters, tool data, etc.)
are explained with graphics. The Circle key allows
you to switch between the help graphics for internal
and external machining.
„ Simulation window
The simulation window shows a graphic
representation of the contour elements and a
simulation of the tool movements. This enables you
to check cycles, entire cycle programs, and DIN
programs.
„ ICP contour graphics
Display of the contour during ICP programming.
„ DIN editing window
Display of the DIN program during DIN
programming. It is superimposed on the "machine
window."
„ Error window
Display of encountered errors and warnings.