HEIDENHAIN MANUALplus 4110 - Manual (Page 84)

84 4 Cycle Programming
4.1 W
o
rk
ing with Cy
cles
Soft keys in cycle programming
Depending on the type of cycle, you define the
functions for the cycle by soft key. The table to the
right lists the soft keys used in cycle programming.
Soft keys in cycle programming
Call the ICP editor.
Approach the tool change position.
Activate spindle positioning (M19).
„ On: Tool returns to the cycle start point.
„ Off: Tool remains at cycle end position.
Linear hole pattern on face or lateral surface.
Circular hole pattern on face or lateral surface.
„ On: Rework existing thread.
„ Off: Cut new thread.
Repeat the last thread cut.
Call the "Tool list." You can transfer the T number from
the tool list.
Transfer the actual position X, Z.
Transfer the spindle speed and feed rate from the tool
data.
„ On: Constant speed (rpm)
„ Off: Constant cutting speed (m/min)
„ On: Internal thread
„ Off: External thread
Transfer entered/changed values.
Cancel the current dialog.