HEIDENHAIN MANUALplus 4110 - Manual (Page 36)

36 2 Basics of Operation
2.3 Er
ro
r Messag
es
2.3 Error Messages
The appearance and effect of a MANUALplus error
message depend on the current operation.
Direct error messages
The MANUALplus uses direct error messages
whenever immediate error correction is possible and
advisable, for example if the input value of a cycle
parameter exceeds the valid input range. Confirm the
message with ENTER and correct the error (see figure
to the upper right).
Information of direct error messages:
„ The error description explains the error that has
occurred.
„ The error number is needed whenever you contact
the machine manufacturer about a specific error
message.
„ The time shows you when the indicated error
occurred.
Error display
The control temporarily stores any errors or messages
that appear during system start, operation or program
run, and sets the error symbol in the top line. Using
the Info key, open the error window to view the
messages.
If more error messages have occurred than can be
shown in one screen page of the error window, you
can scroll through the error display with the arrow
keys and PgUp/PgDn to check all messages.
Meaning of the symbols
Warning: The program run / operation continues.
MANUALplus points out the problem.
Error: The program run/operation is stopped. You
must correct the error before being able to continue.